Weather-responsive fountain and pump control for Australian sites
Scope a weather-responsive water-control pilot, select a local weather logger and specify the controller, meter and commissioning requirements.
International deployment
20,000 litres per day reported at a Slovak fountain
At the Vodník fountain in Trenčín, Slovakia, Milesight describes a UC300-based system that responds to wind, rain and temperature. Milesight reports water savings of 20,000 litres per day. The report does not give a baseline period or metering method, so that figure cannot be transferred directly to another fountain.
Suggested Australian pilot
Start at one council fountain or ornamental water feature. Before changing its operation, log make-up water, operating hours, wind and rainfall. Compare periods with similar weather and operating schedules after an engineer commissions the control changes.
Report litres of make-up water per operating hour, total metered litres and interruptions to scheduled service. Record maintenance, leaks and manual overrides alongside each period.
Equipment and engineering scope
The Rika kit records local weather. The UC300 is a separate controller. Confirm the weather signals, water-meter input, network, enclosure, control interface and manual override before specifying equipment. Metering, panels, integration and commissioning require a scoped quotation.
Select equipment for your site
Start with a one-location weather logger if you need a baseline. Add control only after the pump interface and operating rules have been established.
Individual components from ProSense Instruments
Engineering and wholesale quotations
Supply the pump control drawings, meter output, weather signals, fallback state and commissioning requirements.
List loggers, controllers and spares separately. Include site quantities, delivery stages and documentation required for tender.
.png)


