Cold-room alarms and door monitoring for Australian facilities
Choose a Monnit cold-room kit, check gateway and probe requirements, and test how quickly staff receive and acknowledge an alarm.
International deployment
About US$10,000 in stock protected in one incident
Monnit reports that Hershey’s Creamery was using its monitoring equipment at five US production locations. In one truck cooler failure, an alert let staff act in time. Monnit estimated the value of the ice cream saved at about US$10,000.
Suggested Australian pilot
Start with one cool room and its main access door. Record a week of door events and the time staff take to acknowledge existing alerts. With the site manager, run an agreed alarm test without putting stock at risk. Record when the test started, when the message arrived and when somebody acknowledged it. Repeat after any change to escalation.
Compare median acknowledgement time in minutes and count missed alerts. Report stock value only where inventory records and a documented incident support it.
Equipment and engineering scope
The starter kit lists two temperature sensors, two door sensors and one gateway. The expanded kit lists four of each sensor and one gateway. Check cable reach, radio coverage, power and internet access. Confirm software, SMS, SIM and calibration requirements on the quotation.
Select equipment for your site
Compare the starter and expanded kits by the number of monitored points. Select the gateway and software options on the kit page.
Individual components from ProSense Instruments
Engineering and wholesale quotations
List room limits, probe positions, door count and who must acknowledge each alarm.
Provide kit quantities, spare sensor quantities, delivery postcodes and any per-probe certificate requirements.
.png)


