Industrial field kits by application
Updated: 1 hour ago
Choose a field kit for the job you need to do. Each list shows the models and quantities supplied. Open a component for its specifications, or select the complete kit to review current prices and delivery at checkout.
Food production, cold chain and storage — Coldroom dispatch · Warehouse climate · Condensation · Grain receiving · Beverage Brix and rinse water
Buildings and facilities — Air handlers · Building moisture · Lighting and noise · Room ventilation · Gallery lighting · Fibre and copper cabling · Lighting retrofit comparison
Water and horticulture — Greenhouse climate · Water treatment · Nursery grow lights
Maintenance and fabrication — Pumps and fans · Coating inspection · Thickness and finish · Particles and noise · Fan speed · Timber receiving
Coldroom and dispatch temperature kit
Leave two reusable loggers in the coldroom and send the third logger with a returning delivery vehicle. Compare the downloaded records by time after the trip.
Local records with manual USB download. Confirm the operating range and retrieval arrangements for each route.
Warehouse climate comparison kit
Place one logger near receiving and one in the storage area. Use the handheld light meter to spot-check illumination at the same inspection points.
Temperature and humidity are logged. Illuminance is measured during each visit.
Air-handler pressure and airflow kit
Compare differential pressure across an accessible filter with handheld air-speed readings at accessible grilles.
Includes the manometer’s supplied hoses and USB cable. Fixed pressure taps, installation and air-balancing certification are outside the kit.
Pump and fan inspection kit
Take periodic vibration and surface-temperature readings at nominated inspection points and record the asset and operating condition for repeat visits.
Includes the vibration meter’s external accelerometer and the thermometer’s bead and clamp probes. This is a portable inspection kit.
Greenhouse light and climate survey kit
Measure PAR and daily light integral at a growing position. Leave the USB logger at canopy height to record ambient temperature and humidity over the same period.
Includes the PAR meter’s supplied soil rod and Type-C cable. Compare the two records manually.
Building moisture investigation kit
Take pin readings in suitable building material and log nearby air temperature, relative humidity and dew point to investigate recurring damp conditions.
Includes the moisture meter’s protective cover and spare pins. Check the material scale and permitted pin penetration before use.
Coating inspection and ambient logging kit
Spot-check coating thickness on compatible metal substrates and record workshop temperature and humidity during the inspection period.
Includes iron and aluminium reference substrates and six calibration plates. Acceptance limits and traceable calibration certificates are project-specific.
Facilities lighting and noise survey kit
Measure illuminance at work positions and log sound levels at selected locations during a facilities walk-through.
Includes the lux meter’s sensor cover and the sound meter’s windscreen and USB cable. Personal exposure dosimetry and compliance certification are outside the kit.
Cold-store condensation investigation kit
Log ambient temperature, humidity and dew point near a recurring condensation point. Spot-check the surface temperature during the inspection.
Includes the thermometer’s contact probes. Surface readings are taken manually and compared with the ambient log.
Water treatment pH and conductivity kit
Check pH on a collected sample and use the conductivity indicator at a compatible test point. Record both readings against the same sampling location.
The pH meter includes three buffer powders. The conductivity indicator includes an O-ring and universal adaptor. Check the indicator’s connection and range against the installation.
Grain receiving and store climate kit
Measure moisture in a supported grain at intake and log ambient temperature and humidity in the receiving store. Keep the grain type, load reference and time with each reading.
Includes the grain meter and the climate logger with USB cable, batteries and carrying case. Confirm that the grain is covered by a meter preset.
Occupied room ventilation survey kit
Compare room CO₂, temperature and humidity with air-speed readings at an accessible supply grille. Record occupancy and fan settings with each survey.
Includes the CO₂ monitor’s USB charging cable and the vane anemometer’s battery, lanyard and pouch. Air-change calculations require additional site measurements.
Nursery grow light and root-zone survey kit
Check grow-light output at canopy height and compare soil moisture and pH indications across nursery pots or beds. Mark sampling locations to repeat the survey.
Includes the handheld spectroradiometer with batteries and the three-function soil meter. Soil readings support screening and follow-up sampling.
Metal fabrication thickness and finish kit
Check compatible stock thickness ultrasonically and assess surface roughness on machined parts. Record material, location and finish together on the inspection sheet.
Includes the thickness probe, coupling agent and USB cable, plus the roughness tester’s standard sensor and sample plate. Select material settings and acceptance limits for the job.
Workshop particulate and noise survey kit
Take particle and sound-level readings at nominated workshop locations during different operating periods. Compare observations by location, activity and time.
Includes the particle monitor’s tripod, USB power adaptor and case, and a pouch for the sound meter. Personal exposure and compliance assessments require a separate measurement programme.
Gallery lighting and room climate kit
Log illuminance at display locations and take temperature and humidity spot readings nearby. Repeat the checks after changes to lighting, blinds or exhibition layout.
Includes the Bluetooth lux logger, handheld thermo-hygrometer, pouches and thermo-hygrometer batteries. Temperature and humidity readings are recorded manually.
Fan speed and noise inspection kit
Pair a non-contact fan-speed reading with a sound-level reading at the inspection position. Record the fan setting and measurement location for repeat visits.
Includes the tachometer’s reflective tape and fittings, plus the sound meter and pouch. Select an accessible measurement position under the site’s inspection procedure.
Beverage Brix and rinse-water pH kit
Check soluble solids in a beverage sample with the Brix meter and measure pH and temperature in a separate rinse-water sample. Record each result against its batch or rinse point.
Includes the Brix meter and the pH meter’s buffer powders, button batteries and manual. The pH component is selected for water samples.
Timber receiving and storage humidity kit
Take a timber moisture reading on receipt and spot-check the temperature and relative humidity in the storage bay. Record the board, material setting and bay location when comparing readings.
Includes the moisture meter’s USB cable, plus two AAA batteries, a pouch and a manual for the room climate meter. Both instruments provide local readings.
Fibre and copper network troubleshooting kit
Identify fibre links and check optical power with the fibre instrument. Use the separate cable tester to trace and map copper network cabling during an installation or maintenance visit.
Includes the fibre identifier, batteries and carrying bag, plus the copper tester’s emitter, receiver, remote identifier, RJ11 and RJ45 adaptors and carry pouch. Confirm fibre connector and wavelength suitability for the link.
Lighting retrofit comparison kit
Compare lighting before and after a fit-out. Use the spectral meter for colour temperature and colour rendering, then use the split-sensor lux meter to log illuminance at repeatable work-plane positions.
Includes the spectral meter with two AA batteries and manual, and the Bluetooth lux meter with case and manual. Record the lamp setting and measurement position for each comparison.
.png)


