Sanitary Electromagnetic Flow Meter – Stainless Steel, DN10–DN50

This sanitary electromagnetic flow meter provides non-intrusive flow measurement for conductive liquids using electromagnetic sensing technology with no moving parts. The smooth, stainless-steel flow path supports hygienic installations and simplifies cleaning, making it suitable for food, beverage, pharmaceutical utilities, and clean water processes where contamination risk must be minimised.

An integrated digital display provides clear local indication of flow rate and totals, allowing operators to verify performance on site. Designed for fixed inline installation, the meter integrates with automation and monitoring systems via standard signal interfaces (configuration dependent).

This product is supplied as a flow monitoring instrument only and must be installed and commissioned by suitably qualified personnel.

• Measurement Type: Electromagnetic flow meter

• Measured Media: Conductive liquids (application dependent)

• Nominal Sizes: DN10 to DN50

• Construction: Sanitary stainless-steel body

• Display: Integrated digital display

• Measurement Principle: Electromagnetic (no moving parts)

• Installation Type: Inline, fixed installation

• Application Category:

  • Food and beverage processing

  • Pharmaceutical and clean utilities

  • Water and clean liquid monitoring

  • Hygienic industrial processes

• Chemical Compliance: No high-concern chemicals declared

Compliance & Regulatory Notice (Australia)

• Electrical Classification: Low-voltage industrial measuring equipment (system dependent)

• Intended Use: Flow monitoring and indication only

• Regulatory Scope:

  • Not a custody-transfer or billing flow meter

  • Not approved for trade measurement or regulated metrology

  • Not certified as a safety-instrumented or fail-safe device

• Certification Status: No Australian trade measurement approval supplied

• Australian Compliance Position:

  • Supplied as an industrial flow monitoring instrument

  • Final system compliance, hygienic suitability, installation method, and application validation remain the responsibility of the system integrator or installer

Important: Use in regulated food, beverage, or pharmaceutical environments may require additional validation, certification, and cleaning-in-place (CIP) compatibility assessment by the system owner.

Installation Disclaimer

Installation and commissioning must be carried out by suitably qualified personnel in accordance with applicable process, hygiene, and electrical safety standards. ProSense Instruments supplies this product as a monitoring instrument only and does not warrant suitability for safety-critical, billing, or regulated applications without appropriate system design, certification, and validation.