top of page
10-Port Gigabit Unmanaged PoE Ethernet Switch with 8 × PoE Ports and 2 × RJ45

10-Port Gigabit Unmanaged PoE Ethernet Switch with 8 × PoE Ports and 2 × RJ45

$129.00Price
Quantity
Order (ETA 8–12 Business Days)
This reliable unmanaged Gigabit PoE switch delivers high-speed data connectivity and centralised power for edge devices in a simple, plug-and-play design. Featuring eight PoE-enabled ports and two dedicated uplinks, it is ideal for surveillance, Wi-Fi access points, VoIP, and small commercial or industrial networks.

  • This unmanaged Gigabit Ethernet switch is designed for straightforward network expansion where configuration simplicity and PoE capability are required. Eight PoE-enabled Gigabit RJ45 ports supply both data and power to connected devices such as IP cameras, wireless access points, access control systems, and IoT equipment. Two additional Gigabit RJ45 uplink ports provide stable connectivity to routers, NVRs, or core switches.

    Support for IEEE 802.3af/at standards enables automatic detection and safe power delivery to compatible devices, reducing installation complexity and cabling requirements. A non-blocking switching architecture ensures consistent performance across all ports.

    Integrated DIP switch functions provide additional operational flexibility, including extended transmission distance modes for long cable runs and remote PoE device reboot capability. The fanless metal enclosure ensures silent, maintenance-free operation suitable for continuous indoor use.

  • Network & Performance

    • Total ports: 10 × RJ45 Ethernet

    • PoE ports:

      • 8 × 10/100/1000 Mbps (PoE-enabled)

    • Uplink ports:

      • 2 × 10/100/1000 Mbps RJ45

    • Switching capacity: 20 Gbps

    • Packet forwarding rate: 14.88 Mpps

    • Forwarding delay: < 10 µs

    • MAC address table: 2K entries

    • Packet buffer: 1 MB

    • Jumbo frame support: Up to 2K bytes

    • Duplex mode: Full-duplex and half-duplex

    • Auto MDI/MDIX: Supported

    • VLAN support: Yes

    PoE Capabilities

    • PoE standard: IEEE 802.3af / IEEE 802.3at (PoE / PoE+)

    • PoE ports: Ports 1–8

    • Maximum PoE output per port: 30 W

    • Total PoE power budget: 135 W

    • PoE pinout: 1, 2, 3, 6

    • DIP switch functions:

      • Long-distance transmission mode (up to ~250 m, speed dependent)

      • Remote PoE device reboot

    Electrical & Environmental

    • Input voltage: 100–240 VAC, 50/60 Hz

    • Operating temperature: -10°C to +50°C

    • Storage temperature: -40°C to +70°C

    • Cooling: Fanless, passive design

    Mechanical

    • Installation: Desktop or cabinet mount

    • Enclosure: Metal housing

    • Dimensions: 190 × 140 × 44 mm

    • Weight: 0.6 kg

    Compliance

    • CE

    • FCC

    • RoHS

    Typical Applications

    • IP camera and surveillance systems (fixed and PTZ)

    • Wireless access points (Wi-Fi 5 / Wi-Fi 6)

    • VoIP phones

    • Access control and security devices

    • Small commercial and industrial networks

    • IoT and edge device deployments

    Installation & Compliance Notes

    • This product is intended for data networking and PoE power delivery applications only and does not provide routing, firewall, or cybersecurity gateway functionality.

    • PoE power is supplied only to compatible IEEE 802.3af/at devices. Connecting non-compliant equipment may result in damage.

    • Extended-distance PoE modes may reduce data throughput and should be used only where required by cable length.

    • Total PoE output power is shared across all PoE ports and must not exceed the specified PoE power budget.

    • Installation should be carried out indoors in a controlled, well-ventilated environment.

    • This switch is not designed for life-safety, emergency, or safety-critical systems unless explicitly specified.

    • ProSense Instruments is not responsible for damage or performance issues caused by incorrect installation, incompatible devices, or unsuitable cabling or power sources.

bottom of page