.png)
Manufacturer Case Insight: Milesight Hotel BMS Modernisation in France
Manufacturer-reported case | Milesight and its project partners | ProSense application commentary
Milesight describes a LoRaWAN-based BMS upgrade at a 170-room Novotel in France, delivered with SCORP-IO and SPARWAN. The hotel needed centralised building management while remaining operational. This is a manufacturer and partner reference, not a ProSense-delivered project.
What the published project used
Milesight reports a combination of thermostats, TS302 temperature sensors, UG65 gateways and the SCorp-io BMS platform. The case describes reuse of existing wiring, domestic-hot-water measurements and integration of building systems into a common management environment. Its relevance is the integration approach, rather than an assumption that the same hardware fits every hotel.
What an Australian building owner can learn
Begin with an inventory of existing plant, controls and accessible data. Identify which areas need additional measurements and which can use existing signals. Monitoring-only additions may be scoped separately from commands that change HVAC operation. A staged rollout can help establish data quality before broader operational changes are considered.
Integration questions to settle
Confirm the exact gateway, firmware, device decoder and BMS interface for the proposed system. Define point names, engineering units, update intervals and what an operator sees when a device is offline. The fact that equipment uses LoRaWAN does not, on its own, establish compatibility with a particular BMS.
A sensible first-stage brief
Select one representative area, document the existing control arrangement and agree what success looks like: reliable readings, correct point mapping and an intelligible operator view. Any control changes require assessment of the existing equipment, authority to issue commands and suitable fallback behaviour.
Evidence and expectations
The source reports its own deployment results. No energy-saving percentage or equivalent result is promised here. ProSense can help scope the sensing and connectivity requirements for a building project, with the integration responsibilities agreed before supply.
Related equipment and source material
Planning a similar application? Contact ProSense on 1800 560 854 or sales@prosense.com.au with your measurement points, site conditions and reporting requirements.
