Split Electromagnetic Flow Meter – Remote Display, PTFE Lined, Flanged

This split electromagnetic flow meter provides non-intrusive flow measurement for conductive liquids such as water, seawater, and compatible acidic or alkaline solutions. The split (remote display) configuration allows the sensor to be installed in harsh or confined locations while the display and electronics are mounted remotely for convenient access and visibility.

Using electromagnetic measurement principles with no moving parts, the meter maintains stable performance even in liquids containing impurities or suspended solids. The PTFE-lined flow tube and corrosion-resistant electrodes support long service life in demanding applications.

An LCD remote display provides clear local indication of flow rate and totals, while pulse, 4–20 mA, and RS485 outputs enable seamless integration with PLCs, RTUs, and SCADA systems. The product is supplied as a flow monitoring instrument only and must be installed and commissioned by suitably qualified personnel.

• Measurement Type: Electromagnetic flow meter (split / remote display)

• Measured Media: Conductive liquids, including:

  • Water and seawater

  • Acidic and alkaline liquids (material compatibility dependent)

• Nominal Sizes: DN50 / DN80 / DN100 (size dependent)

• Connection Type: DIN flanged

• Body Material: Stainless steel (SS304)

• Lining Material: PTFE

• Electrode Material: Stainless steel (SS316L)

• Display: Remote LCD display unit

• Signal Outputs:

  • Pulse

  • 4–20 mA

  • RS485 (Modbus-compatible systems)

• Power Supply: 24 V DC

• Installation Type: Inline, fixed pipeline installation with remote electronics

• Application Category:

  • Water and wastewater systems

  • Industrial process monitoring

  • Chemical and utility applications

• Chemical Compliance: No high-concern chemicals declared

Compliance & Regulatory Notice (Australia)

• Electrical Classification: Low-voltage industrial measuring equipment

• Intended Use: Flow monitoring and indication only

• Regulatory Scope:

  • Not a custody-transfer or billing flow meter

  • Not approved for trade measurement or regulated metrology

  • Not a safety-instrumented or fail-safe device

• Certification: Manufacturer CE conformity documentation supplied as an international reference

• Australian Compliance Position:

  • Supplied as an industrial flow monitoring instrument for integration into compliant systems

  • Final system compliance, earthing, installation suitability, and application validation remain the responsibility of the system integrator or installer

Important: This device must not be relied upon as the sole means of process safety control, spill prevention, or regulatory compliance measurement.

Installation Disclaimer

Installation, earthing, and commissioning must be carried out by suitably qualified personnel in accordance with applicable electrical, process, and site safety standards. ProSense Instruments supplies this product as a monitoring instrument only and does not warrant suitability for safety-critical, billing, or regulated applications without appropriate system design, certification, and validation.