PID Temperature Controller – K-Type Input, Relay or SSR Output, 4–20mA Control

Electrical Specifications

• Control Method: PID temperature control

• Sensor Input Type: K-type thermocouple

• Output Options (model dependent):

  • Relay output or

  • SSR drive output

• Output Selection: Single output type only

• Battery Included: No

Output Limitation Notice:
This controller supports one output type only. Relay and SSR outputs cannot be used simultaneously. Output type must be selected at the time of configuration or purchase.

Input Specifications

• Sensor Type: K-type thermocouple

• Measurement Principle: Thermoelectric temperature sensing

Input Disclaimer:
Measurement accuracy depends on correct thermocouple type selection, wiring polarity, cold-junction compensation, and installation conditions. Incompatible sensors or incorrect wiring may cause inaccurate readings.

Control & Performance

• Control Algorithm: PID regulation

• Intended Load Types: Heating and temperature-dependent processes

Control Disclaimer:
PID performance depends on correct parameter tuning and load characteristics. Improper tuning may result in overshoot, oscillation, or unstable control.

Mechanical & Installation

• Mounting Style: Panel-mount (model dependent)

• Intended Installation: Electrical control panels or enclosures

Installation Disclaimer:
This controller must be installed in a suitable enclosure with appropriate electrical protection. Incorrect wiring or installation may result in malfunction or unsafe operation.

Compliance & Safety

• Certification: CE marked (manufacturer declaration)

• Hazardous Substances: No high-concern chemicals declared

• Country of Origin: Mainland China

• Intended Use: Industrial temperature control applications

Compliance Disclaimer:
CE marking applies to the controller as a component only. Final system compliance—including electrical safety, EMC, and installation standards—is the responsibility of the system designer or installer. ProSense does not certify complete systems or site installations.

Installation & Use Limitations

• Single output mode only (Relay or SSR)

• Not a safety-rated controller

• Not suitable as a primary shutdown or emergency stop device

• External over-temperature and over-current protection is recommended

• Installation must be carried out by qualified personnel

Installation Disclaimer:
This product is supplied as an industrial control component. Suitability for any specific application must be independently verified prior to installation. Incorrect selection, wiring, or tuning may result in equipment damage or unsafe operation.

• Industrial heaters and ovens

• Temperature regulation systems

• PLC-assisted control panels

• OEM machinery and equipment

• Process heating and monitoring