.png)
ACREL DIN Rail Mounted DC Power and Energy Meter 1000V
ACREL DIN Rail Mounted DC Power and Energy Meter 1000V is a DIN-rail mounted DC power meter for measuring voltage, current, power and energy in DC systems. It supports DC voltage inputs up to 1000 V and current measurement using 0-75 mV shunts or compatible Hall sensor signal inputs. RS485 communication with Modbus-RTU and DL/T 645-2007 protocols provides access to measured data for monitoring and energy management systems.
DJSF1352-RN (Base/Standard): Uses a standard wide-range auxiliary power supply of AC/DC 85–265V.
DJSF1352-RN-P1: Uses a specific low-voltage DC auxiliary power supply of DC 24V (or 48V depending on configuration).
DJSF1352-RN-P2: Uses a specific low-voltage DC auxiliary power supply of DC 12V. (Note: Selecting the P2 auxiliary power option typically restricts current input compatibility to 0–75mV shunts rather than certain dual selections).
The ACREL DIN Rail Mounted DC Power and Energy Meter 1000V provides measurement and monitoring of key electrical parameters in DC power systems. The meter is designed with two DC input channels and can measure voltage, current, power and forward and reverse energy.
DC voltage can be measured from 0 to 1000 V, while current measurement can be configured for a 0-75 mV shunt or Hall sensor inputs including 0-20 mA, 4-20 mA, 0-5 V and 0-10 V. The manufacturer specifies Class 1 or Class 0.5 accuracy, depending on the configuration.
The meter provides an 8-bit segment LCD for local viewing and an RS485 communication interface. Supported communication protocols include Modbus-RTU and DL/T 645-2007, allowing measured information to be transferred to compatible monitoring or control systems.
The DJSF1352-RN is installed on a 35 mm DIN rail and is suitable for applications including DC battery systems, charging piles, solar photovoltaic systems and telecommunications base stations.
How It Works
- Measures DC voltage directly within the specified 0-1000 V input range.
- Measures current through either a 0-75 mV shunt signal or supported Hall sensor signal inputs.
- Calculates and displays electrical measurements including current, voltage, power and energy.
- Provides forward and reverse energy measurement for DC systems.
- Sends measurement data through RS485 using Modbus-RTU or DL/T 645-2007 protocols.
Why Choose This Product
- Designed specifically for DC electrical measurement and energy monitoring.
- Supports two DC input channels.
- Provides multiple current input options for shunts and Hall sensors.
- Supports communication with monitoring systems through RS485.
- DIN-rail mounting allows the meter to be incorporated into suitable control and distribution equipment.
- Provides both local LCD indication and digital communication.
Benefits
- Provides a central point for monitoring important DC electrical parameters.
- Supports integration into automated energy monitoring systems.
- Allows measurement data to be accessed locally or through the communication interface.
- The dual-channel design can support DC monitoring requirements where two measurement inputs are required.
- Relay outputs and dry-contact inputs provide additional interface functions for compatible control applications.